New

At-Home DME Unlock

Borrow our bench unlock kit to unlock your G8x DME at home with the chris3g app, then send it back. Sold only with an unlock-required tune.

  • Ships within the US
  • No unlock appointment
  • Refundable deposit
Service Details

Our bench unlock kit lets you unlock your car's DME (its engine computer) yourself, at home, with the chris3g app. There's no appointment, and the DME stays in the car: you unplug its connectors, plug in the tool, and the app does the unlock.

Why unlock

A G8x DME leaves the factory locked, so it only accepts BMW's own software. Our OEM+ and OTS engine tunes need it unlocked first. The CS software and CS engine flashes work on a stock DME, so they don't need the kit.

Already bench-unlocked by autotuner, MHD, Femto (November 2025 or later) or another bench unlock? You don't need the kit either.

What's in the kit

  • The bench unlock tool, with its DME cable and power clips
  • A USB cable and a USB-C adapter
  • A prepaid UPS return label

What you'll need

  • A Windows PC or Mac with the chris3g app, plugged in and kept awake
  • Your car with a charged battery and the ignition off
  • A 15 mm socket, for the strut brace over the DME

How the unlock goes

The unlock itself takes 5–10 minutes. The first time, allow about an hour for the whole job, most of it getting to the DME and putting everything back.

  1. Take off the strut brace and lift off the DME cover.
  2. Unplug the DME's six connectors, plug in the tool's two, and clip its power leads to the jump-start points in the engine bay.
  3. Connect the tool to your computer and open the app. It finds the tool: click Connect, then Unlock.
  4. When the app shows Unlock complete, unplug the tool, reconnect the car's six connectors, check each one is fully seated, then refit the cover and brace.

Your kit page has the full step-by-step guide, with photos, as soon as you order.

Watch the unlock

Available only with an unlock-required service purchased in the same checkout. Standalone unlock is not offered.

Shipping & Returns

Plan to use and return the kit within one day of delivery. Your deposit is refunded after return and inspection, less outbound and return shipping.

The kit ships to US addresses only.

How It Works
  1. Choose your service and reserve a kit

    Add a qualifying service and the unlock kit to one cart. Pay for your service, unlock fee, and deposit together to reserve your place in line.

  2. Unlock at home

    Use the kit when it arrives. Book your coding session from your order page. It’s best to book once the kit ships and its delivery date is confirmed.

  3. Return the kit for your deposit refund

    Send the kit back promptly. After return and inspection, your deposit is refunded less shipping fees both ways.